Replacement Filter Bundle for Airpura 900
Replacement Filter Bundle for Airpura 900
Full refresh in one box—restore airflow and odor control
Everything you need to bring your Airpura 900 back to peak performance. Swap the MERV-13 particle filter, 20-lb Super-Gas carbon canister, and two prefilters to quickly improve suction and remove smoke, VOCs, and odors. Top-access design makes changes fast.
BENEFITS
- One-and-done kit for a complete service.
- Restores suction and fine-particle capture (MERV-13).
- Heavy 20-lb carbon removes many fumes and odors.
- Easy top access: unlatch, lift, replace—no tools.
- Clear replacement cues: change when suction drops or off-gassing is noticeable.
In the Box & Installation
- (2) Prefilters – sit inside the particle filter to catch larger debris.
- (1) MERV-13 Industrial Particle Filter – captures fine dust/smoke.
- (1) Super-Gas Activated Carbon Filter (20 lb) – targets VOCs/odors.
Install steps (about 10 minutes)
- Power OFF and unplug the unit; remove any hose/arm from the top inlet.
- Unlatch four top latches; lift off the top and foam gasket.
- Lift out used filters; bag and discard per local rules.
- Vacuum/wipe the compartment; insert new filters; re-seat gasket; relatch.
-
Restore power; run on MAX briefly to confirm airflow.
FAQs
Will this bundle fit the 900 MAX?
No, this bundle is sized/quantified for the Airpura 900. The 900 MAX uses two particle filters and two carbon canisters (40 lb total). Order MAX-specific quantities for that model.
How often should I replace these filters?
Intervals depend on load. Replace prefilter/particle when suction drops; replace carbon when off-gassing is noticeable or odors break through. Heavy contamination can require changes within weeks.
Any safety tips during service?
Yes, the carbon canister is heavy; lift with care. Keep humidity ≤50%; do not use the unit in flammable atmospheres; ensure the unit is OFF before plugging in.
FOR USE:
Replacement Filter Bundle for Airpura 900
Replacement Filter Bundle for Airpura 900
Full refresh in one box—restore airflow and odor control
Everything you need to bring your Airpura 900 back to peak performance. Swap the MERV-13 particle filter, 20-lb Super-Gas carbon canister, and two prefilters to quickly improve suction and remove smoke, VOCs, and odors. Top-access design makes changes fast.
BENEFITS
- One-and-done kit for a complete service.
- Restores suction and fine-particle capture (MERV-13).
- Heavy 20-lb carbon removes many fumes and odors.
- Easy top access: unlatch, lift, replace—no tools.
- Clear replacement cues: change when suction drops or off-gassing is noticeable.
In the Box & Installation
- (2) Prefilters – sit inside the particle filter to catch larger debris.
- (1) MERV-13 Industrial Particle Filter – captures fine dust/smoke.
- (1) Super-Gas Activated Carbon Filter (20 lb) – targets VOCs/odors.
Install steps (about 10 minutes)
- Power OFF and unplug the unit; remove any hose/arm from the top inlet.
- Unlatch four top latches; lift off the top and foam gasket.
- Lift out used filters; bag and discard per local rules.
- Vacuum/wipe the compartment; insert new filters; re-seat gasket; relatch.
-
Restore power; run on MAX briefly to confirm airflow.
FAQs
Will this bundle fit the 900 MAX?
No, this bundle is sized/quantified for the Airpura 900. The 900 MAX uses two particle filters and two carbon canisters (40 lb total). Order MAX-specific quantities for that model.
How often should I replace these filters?
Intervals depend on load. Replace prefilter/particle when suction drops; replace carbon when off-gassing is noticeable or odors break through. Heavy contamination can require changes within weeks.
Any safety tips during service?
Yes, the carbon canister is heavy; lift with care. Keep humidity ≤50%; do not use the unit in flammable atmospheres; ensure the unit is OFF before plugging in.
FOR USE:
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Replacement Filter Bundle for Airpura 900
Full refresh in one box—restore airflow and odor control
Everything you need to bring your Airpura 900 back to peak performance. Swap the MERV-13 particle filter, 20-lb Super-Gas carbon canister, and two prefilters to quickly improve suction and remove smoke, VOCs, and odors. Top-access design makes changes fast.
BENEFITS
- One-and-done kit for a complete service.
- Restores suction and fine-particle capture (MERV-13).
- Heavy 20-lb carbon removes many fumes and odors.
- Easy top access: unlatch, lift, replace—no tools.
- Clear replacement cues: change when suction drops or off-gassing is noticeable.
In the Box & Installation
- (2) Prefilters – sit inside the particle filter to catch larger debris.
- (1) MERV-13 Industrial Particle Filter – captures fine dust/smoke.
- (1) Super-Gas Activated Carbon Filter (20 lb) – targets VOCs/odors.
Install steps (about 10 minutes)
- Power OFF and unplug the unit; remove any hose/arm from the top inlet.
- Unlatch four top latches; lift off the top and foam gasket.
- Lift out used filters; bag and discard per local rules.
- Vacuum/wipe the compartment; insert new filters; re-seat gasket; relatch.
-
Restore power; run on MAX briefly to confirm airflow.
FAQs
Will this bundle fit the 900 MAX?
No, this bundle is sized/quantified for the Airpura 900. The 900 MAX uses two particle filters and two carbon canisters (40 lb total). Order MAX-specific quantities for that model.
How often should I replace these filters?
Intervals depend on load. Replace prefilter/particle when suction drops; replace carbon when off-gassing is noticeable or odors break through. Heavy contamination can require changes within weeks.
Any safety tips during service?
Yes, the carbon canister is heavy; lift with care. Keep humidity ≤50%; do not use the unit in flammable atmospheres; ensure the unit is OFF before plugging in.
